PIC TEST Dial Test Indicators PCN Series
The New Pic Test is a lever type dial indicators used in all over the world.
It is a measuring instrument used for measurements of restricted areas,and the outside/
inside, groove width and centering with the dial gauge installed to the lathe or the milling
cutting machine for measurements with the gauges held on the height gauges.
FEATURES
Without change lever (Automatic inverse type)
- The lever type dial gauge of this type has no change lever, the contact point inverses
automatically in normal or reverse direction as desired and pointer turns always CW to
improve the measuring efficiency.
Miniature Bearing Used
- The miniature bearing used as a bearing at the pivot of the contact point to show good
indication stability without any effect by rod play.
O-ring used
- Oil resistance is enhanced by seating the O-ring in the turning section of the outer frame
PICTEST without change lever PCN series
PCN-0
Graduation 0.01mm
Range 0.5mm
Small dial face (Ø29)
Graduation 0.01mm
Range 0.5mm
Small dial face (Ø29)
PCN-1A
Graduation 0.01mm
Range 0.5mm
PCN-1B
Graduation 0.01mm
Range 0.8mm
PCN-1L
Graduation 0.01mm
Range 1.0mm
Long contact point (L = 42.8mm)
Graduation 0.01mm
Range 1.0mm
Long contact point (L = 42.8mm)
PCN-2
Graduation 0.002mm
Range 0.28mm
PCN-2B
Graduation 0.002mm
Range 0.2mm
PCN-S
Graduation 0.001mm
Range 0.14mm
High accuracy
Graduation 0.001mm
Range 0.14mm
High accuracy
PCN-7A
Graduation 0.01mm
Range 1.5mm
Wide measuring range
with Shorter Pointer
Graduation 0.01mm
Range 1.5mm
Wide measuring range
with Shorter Pointer
PCN-7C
Graduation 0.002mm
Range 0.6mm
Wide measuring range
with Shorter Pointer
Graduation 0.002mm
Range 0.6mm
Wide measuring range
with Shorter Pointer
PICTEST Without change lever PCN series (Vertical)
PCN-5
Graduation 0.01mm
Range 0.5mm
PCN-6
Graduation 0.002mm
Range 0.28mm
PCN-6S
Graduation 0.001mm
Range 0.14mm
SPECIFICATIONS
Model | Graduation (mm) | Range (mm) | Reading | Accuracy (µm) | Measuring force less than (N) | |||
Wide-range forward accuracy | Adjacent error | Backward error | ||||||
PCN-0 | 0.01 | 0.5 | 0 – 25 – 0 | 5 | 5 | 3 | 0.3 | |
PCN-1A | 0.01 | 0.5 | 0 – 25 – 0 | 5 | 5 | 3 | 0.3 | |
PCN-1B | 0.01 | 0.8 | 0 – 40 – 0 | 8 | 5 | 3 | 0.3 | |
PCN-1L | 0.01 | 1.0 | 0 – 50 – 0 | 10 | 5 | 4 | 0.3 | |
PCN-2 | 0.002 | 0.28 | 0 – 140 – 0 | 3 | 2 | 2 | 0.3 | |
PCN-2B | 0.002 | 0.2 | 0 – 100 – 0 | 3 | 2 | 2 | 0.3 | |
PCN-S | 0.001 | 0.14 | 0 – 70 – 0 | 3 | 2 | 2 | 0.3 | |
PCN-7A | 0.01 | 1.5 | 0 – 25 – 0 | 8 | 5 | 3 | 0.3 | |
PCN-7C | 0.002 | 0.6 | 0 – 100 – 0 | 6 | 2 | 3 | 0.3 | |
PCN-5 | 0.01 | 0.5 | 0 – 25 – 0 | 5 | 5 | 3 | 0.3 | |
PCN-6 | 0.002 | 0.28 | 0 – 140 – 0 | 3 | 2 | 2 | 0.3 | |
PCN-6S | 0.001 | 0.14 | 0 – 70 – 0 | 3 | 2 | 2 | 0.3 |
DIMENSIONS
Model | L (mm) |
PCN-1A, PCN-7A | 21.3 |
PCN-1B | 22.2 |
PCN-1L | 42.8 |
PCN-2 | 17.8 |
PCN-2B, PCN-7C | 16.6 |
PCN-S | 11.7 |
Model | L (mm) |
PCN-0 | 21.3 |
Model | L (mm) |
PCN-5 | 21.3 |
PCN-6 | 17.8 |
PCN-6S | 11.7 |